News Center
2019-04-26
Regular maintenance of the car requires attention to 6 details!
Cars, as well as any other devices or machinery, wear out details over time, reducing the quality of lubricants and solutions for automotive systems.
Nothing is eternal and undamaged, especially for cars, whose work process is continuous and rigorous, so it is necessary to ensure safety and quality during operation.
Therefore, after a period of time, the car will undergo inspections and maintenance to ensure the safety and stability of the parts, reduce faults, and extend the service life of the engine and engine components.
Car manufacturers recommend regular inspections of vehicles to ensure their safety and stability, and national laws also require vehicle quality inspections to ensure the safety of vehicles and easy management of vehicle quality when added to traffic.
Regular car maintenance inspections can increase the safety and lifespan of a car, so what should be done when conducting regular maintenance? how? The following article will introduce the most basic testing of cars during regular maintenance in the garage.
1. Lubrication and viscous filtration
Usually, car owners regularly inspect their vehicles, which have been in use for a long time and for a long distance, and the vehicle usually pays attention (because every time the lubricating oil is changed, it is installed, and when set to kilometers). Put the newspaper truck).
This job is very simple, such as forklifts and removing the oil drain plug, draining the engine oil into a viscous cleaner, cleaning the filter, and then removing the filter to check the degree of filtration.
The car will replace the filter after the second viscosity change (once the filter is replaced, the viscosity will be changed twice). After checking and tightening the adhesive slurry, the car will fully light up the lubricant and the type of lubricant according to the manufacturer, customer requirements, or maintenance center. Check, replace, and lubricate oil during regular maintenance
2. Check and clean the engine air filter
The engine air filter plays an important role in cleaning the air before it mixes with the fuel entering the combustion chamber. If the air filter is torn, dirt will pass through and enter the engine.
Affects the operation of the engine and even causes machine damage. If it is too dense, it will be blocked and air will be difficult to pass through, resulting in a lack of air to mix with the ideal fuel mixture.
Whenever regular maintenance is carried out, technicians should be required to remove the filter for inspection and cleaning. The job is very simple, just remove the air tank, remove the air filter, and blow dust, the shell is too dirty.
Clogged filters should be replaced with new ones and old car filters should be used to ensure good performance for the engine. Experts suggest replacing the air filter every 50000 kilometers to ensure that the engine always maintains clean air during operation.
3. Check and clean the engine air filter
Checking the air conditioning, cooling, and air conditioning is not that important, but small and highly efficient air purifiers can remove dust from the outdoor air and then enter the car space through indoor air.
Cool fresh air. If the dirt filter is very clogged, it will make the car cool when air conditioning, and due to the dirt, it may produce an unpleasant odor. Therefore, attention should be paid to cleaning this small component.
So that you can always rest assured when using cars with air conditioning system cooling. Checking the air conditioning is very simple, just find the filter (usually inside or outside the front glass of the car), and if it is too dirty, disassemble and clean or replace it.
It is recommended to convert the air conditioning from 15000 to 20000 kilometers in the car technical manual, but under weather and dirt road conditions, you can replace this filter faster.
4. Inspection and cleaning of car air conditioning
Braking is a difficult task, with stress and high temperatures during work, especially on crowded roads such as China. We must continue to use it during peak hours when traveling on the streets.
This will naturally disappear and after a period of time, it needs to be cleaned to avoid scratching the disc and increasing its friction when it becomes dirty. If you find that the tires are worn to the limit.
They must be replaced to ensure the safe and effective operation of the brakes. Checking the brake system of maintenance personnel is relatively easy, just remove the wheels and unscrew them to check the condition.
If it is dirty, then reassemble it. If the tires are worn, they should be replaced with the correct type of vehicle to ensure the correct technical standards. Inspect and maintain car brakes
5. Check the gasoline filter, gear oil level, water level, brake oil, glass cleaning water
In addition to engine oil, other types of oil, such as gear oil, brake fluid, steering fluid, glass washer fluid and cooling water, must also be stable enough to keep the vehicle in good condition.
The most concerned. These oil levels must always be in a healthy state, and the cooling water must also be sufficient to prevent the vehicle from dehydrating the coolant, resulting in heat loss to the engine.
In addition, regular cleaning and disinfection are also necessary to clean the residue in the gasoline filter to make the filter more ventilated and facilitate the supply of fuel to the engine.
6. Check gear oil, brake fluid, coolant, glass cleaner, etc. during maintenance
Whether it's a supercar or a popular car, cars or cars have the greatest wear and tear after a period of use. To ensure the safety and stability of your vehicle and extend its service life, you should regularly keep the vehicle in its best condition.
Nothing is eternal and undamaged, especially for cars, whose work process is continuous and rigorous, so it is necessary to ensure safety and quality during operation.
Therefore, after a period of time, the car will undergo inspections and maintenance to ensure the safety and stability of the parts, reduce faults, and extend the service life of the engine and engine components.
Car manufacturers recommend regular inspections of vehicles to ensure their safety and stability, and national laws also require vehicle quality inspections to ensure the safety of vehicles and easy management of vehicle quality when added to traffic.
Regular car maintenance inspections can increase the safety and lifespan of a car, so what should be done when conducting regular maintenance? how? The following article will introduce the most basic testing of cars during regular maintenance in the garage.
1. Lubrication and viscous filtration
Usually, car owners regularly inspect their vehicles, which have been in use for a long time and for a long distance, and the vehicle usually pays attention (because every time the lubricating oil is changed, it is installed, and when set to kilometers). Put the newspaper truck).
This job is very simple, such as forklifts and removing the oil drain plug, draining the engine oil into a viscous cleaner, cleaning the filter, and then removing the filter to check the degree of filtration.
The car will replace the filter after the second viscosity change (once the filter is replaced, the viscosity will be changed twice). After checking and tightening the adhesive slurry, the car will fully light up the lubricant and the type of lubricant according to the manufacturer, customer requirements, or maintenance center. Check, replace, and lubricate oil during regular maintenance
2. Check and clean the engine air filter
The engine air filter plays an important role in cleaning the air before it mixes with the fuel entering the combustion chamber. If the air filter is torn, dirt will pass through and enter the engine.
Affects the operation of the engine and even causes machine damage. If it is too dense, it will be blocked and air will be difficult to pass through, resulting in a lack of air to mix with the ideal fuel mixture.
Whenever regular maintenance is carried out, technicians should be required to remove the filter for inspection and cleaning. The job is very simple, just remove the air tank, remove the air filter, and blow dust, the shell is too dirty.
Clogged filters should be replaced with new ones and old car filters should be used to ensure good performance for the engine. Experts suggest replacing the air filter every 50000 kilometers to ensure that the engine always maintains clean air during operation.
3. Check and clean the engine air filter
Checking the air conditioning, cooling, and air conditioning is not that important, but small and highly efficient air purifiers can remove dust from the outdoor air and then enter the car space through indoor air.
Cool fresh air. If the dirt filter is very clogged, it will make the car cool when air conditioning, and due to the dirt, it may produce an unpleasant odor. Therefore, attention should be paid to cleaning this small component.
So that you can always rest assured when using cars with air conditioning system cooling. Checking the air conditioning is very simple, just find the filter (usually inside or outside the front glass of the car), and if it is too dirty, disassemble and clean or replace it.
It is recommended to convert the air conditioning from 15000 to 20000 kilometers in the car technical manual, but under weather and dirt road conditions, you can replace this filter faster.
4. Inspection and cleaning of car air conditioning
Braking is a difficult task, with stress and high temperatures during work, especially on crowded roads such as China. We must continue to use it during peak hours when traveling on the streets.
This will naturally disappear and after a period of time, it needs to be cleaned to avoid scratching the disc and increasing its friction when it becomes dirty. If you find that the tires are worn to the limit.
They must be replaced to ensure the safe and effective operation of the brakes. Checking the brake system of maintenance personnel is relatively easy, just remove the wheels and unscrew them to check the condition.
If it is dirty, then reassemble it. If the tires are worn, they should be replaced with the correct type of vehicle to ensure the correct technical standards. Inspect and maintain car brakes
5. Check the gasoline filter, gear oil level, water level, brake oil, glass cleaning water
In addition to engine oil, other types of oil, such as gear oil, brake fluid, steering fluid, glass washer fluid and cooling water, must also be stable enough to keep the vehicle in good condition.
The most concerned. These oil levels must always be in a healthy state, and the cooling water must also be sufficient to prevent the vehicle from dehydrating the coolant, resulting in heat loss to the engine.
In addition, regular cleaning and disinfection are also necessary to clean the residue in the gasoline filter to make the filter more ventilated and facilitate the supply of fuel to the engine.
6. Check gear oil, brake fluid, coolant, glass cleaner, etc. during maintenance
Whether it's a supercar or a popular car, cars or cars have the greatest wear and tear after a period of use. To ensure the safety and stability of your vehicle and extend its service life, you should regularly keep the vehicle in its best condition.
Contact
Chida Auto Parts Manufacturing Co., Ltd.
Address: No. 388, Jingshui South Road, Keqiao District, Shaoxing City, Zhejiang Province
Tel：0575-84311988
E-mail：bob@sxchida.com
